cal aquire timeout , calsetName not required

chaining of csa load and save

Extend with local file based on prefix not path ( fix description for path to state this also)

;*******************************************************************************
; Example configuration for a sequence of calibrations using 1 port
;*******************************************************************************

; Calibration of reference plane at FCM input
[CAL_SParam_1Port]
CalSetDescription = Cal Set for CAL_SParam_1Port calibration
CalSetName = CAL_SParam_1Port
CalType = SParam
ConfigType = Calibration
CsaLoadFilename = Before_CAL_SParam_1Port.csa
DirectoryToUse = C:\Examples
LoadFilename = Before_CAL_SParam_1Port.csa
PathName = PATH_1
SaveFilename = After_CAL_SParam_1Port.csa

; Calibration extending reference plane from FCM input to FCM output
[CAL_ExtendWithFcm_1Port]
CalSetDescription = CalSet for CAL_ExtendWithFcm_1Port
CalSetToExtend = CAL_SParam_1Port
CalType = ExtendWithFcmFile
ConfigType = Calibration
CsaLoadFilename = After_CAL_SParam_1Port.csa
DirectoryToUse = C:\Examples
LoadFilename = After_CAL_SParam_1Port.csa
PathName = PATH_1
SaveFilename = After_CAL_ExtendWithFcm_1Port.csa

; Calibration extending from FCM output using a existing characterization file
[CAL_ExtendWithLocalFile_1Port]
CalSetDescription = CalSet for CAL_ExtendWithFcm_2Port
CalSetToExtend = CAL_ExtendWithFcm_1Port
CalType = ExtendWithLocalFile
ConfigType = Calibration
CsaLoadFilename = After_CAL_ExtendWithFcm_1Port.csa
DirectoryToUse = C:\Examples
Port1ExtendWithFileNameToUse = FCM_1_DEEMBED.S2P
SaveFilename = After_CAL_ExtendWithLocalFile_1Port.csa

; FCM calibration device definition
[FCM_1]
ConfigType = Fcm
IpAddress = 10.11.0.201

; Path specifying the calibration device to be used
[PATH_1]
ConfigType = Path
PnaPort1Device = FCM_1:1

; PNA device definition
[PNA-X]
ConfigType = Pna
DirectoryToUse = C:\Temp
IpAddress = 10.11.0.200

; Sequence to run all 1 port calibrations
[SEQUENCE_1Port]
ConfigType = Sequence
1st_SParam = CAL_SParam_1Port,PNA-X
2nd_ExtendWithFcm = CAL_ExtendWithFcm_1Port,PNA-X
3rd_ExtendWithLocalFile = CAL_ExtendWithLocalFile_1Port,PNA-X