The CalAcquireTimeoutSec defines the period of time in seconds before a PNA measure acquisition (sweep) times out.

The length of this timeout should depend on the number of points in the sweep for this characterization. Typically 60 seconds for 201 points should be long enough. Something to keep in mind, setting this to a overly high number to try and guarantee the sweep always has enough time can cause the characterization not to stop due to errors for very long periods of time. Some trial and error maybe required to determine the best timeout for a particular PNA setup.

See also AB Split Characterization.

An Example:

;*******************************************************************************
; AbSplit configuration example
;*******************************************************************************
[ABSPLIT_1]
CalAcquireTimeoutSec = 60
CalSetToActivate = CalSetToUseName
ConfigType = AbSplit
DirectoryToUse = C:\Temp
Port1DevPair = ICM_FCM1:1
Port2DevPair = ICM_FCM2:1
ThruPortPair = 1:2
SwitchPath = ICM_SW01:1,ICM_SW02:1,ICM_SW03:1,ICM_SW04:1,ICM_SW10:0