Specifies the calibration device that will be used to calibrate the external source.

There is no default value.

Calibrations of the following type are required to set this value.

To learn more about Calibrations using an external source see the Keysight Documentation

An Example:

;*******************************************************************************
; Example configuration for a calibration type DIQ
;*******************************************************************************
[CALIBRATION_DIQ]
CalType = DIQ
ConfigType = Calibration
ExternalSourceDevice = FCM_5:1
PathName = PATH_DIQ
PowerAverageCount = 1
PowerAverageTolerance = 0.02
PowerIterationCount = 30
PowerIterationTolerance = 0.05
PowerLevel = 10
PowerSensorPort = 1
ThruPath1To2 = ICM_PATH_UnknownThru_1-2
ThruPath1To3 = ICM_PATH_UnknownThru_1-3_2-4
ThruPath2To4 = ICM_PATH_UnknownThru_1-3_2-4
ThruPortPairs = 1:2,1:3,2:4

; FCM definitions
[FCM_1]
ConfigType = Fcm
IpAddress = 10.11.0.201
[FCM_2]
ConfigType = Fcm
IpAddress = 10.11.0.202
[FCM_3]
ConfigType = Fcm
IpAddress = 10.11.0.203
[FCM_4]
ConfigType = Fcm
IpAddress = 10.11.0.204
[FCM_5]
ConfigType = Fcm
IpAddress = 10.11.0.205

; Path definitions
[PATH_DIQ]
ConfigType = Path
PnaPort1Device = FCM_1:1
PnaPort2Device = FCM_2:1
PnaPort3Device = FCM_3:1
PnaPort4Device = FCM_4:1
SwitchPath = ICM_PATH_TestPortThru
[ICM_PATH_TestPortThru]
ConfigType = Path
SwitchPath = ICM_SW01:1,ICM_SW02:1,ICM_SW03:1,ICM_SW04:1,ICM_SW10:0
[ICM_PATH_UnknownThru_1-2]
ConfigType = Path
SwitchPath = ICM_SW01:2,ICM_SW02:2,ICM_SW03:2,ICM_SW04:2,ICM_SW05:4,ICM_SW06:1,ICM_SW07:1,ICM_SW08:4
[ICM_PATH_UnknownThru_1-3_2-4]
ConfigType = Path
SwitchPath = ICM_SW01:2,ICM_SW02:2,ICM_SW03:2,ICM_SW04:2,ICM_SW05:1,ICM_SW06:4,ICM_SW07:4,ICM_SW08:1

; ICM multi-switch definitions
[ICM]
ConfigType = MultiSwitch
IpAddress = 10.11.0.100
[ICM_SW01]
ConfigType = Switch
Device = ICM
SwitchIndex = 1
[ICM_SW02]
ConfigType = Switch
Device = ICM
SwitchIndex = 2
[ICM_SW03]
ConfigType = Switch
Device = ICM
SwitchIndex = 3
[ICM_SW04]
ConfigType = Switch
Device = ICM
SwitchIndex = 4
[ICM_SW05]
ConfigType = Switch
Device = ICM
SwitchIndex = 5
[ICM_SW06]
ConfigType = Switch
Device = ICM
SwitchIndex = 6
[ICM_SW07]
ConfigType = Switch
Device = ICM
SwitchIndex = 7
[ICM_SW08]
ConfigType = Switch
Device = ICM
SwitchIndex = 8
[ICM_SW09]
ConfigType = Switch
Device = ICM
SwitchIndex = 9
[ICM_SW10]
ConfigType = Switch
Device = ICM
SwitchIndex = 10

; PNA definition
[PNA-X]
ConfigType = Pna
DirectoryToUse = C:\Temp
IpAddress = 10.11.0.200