The FileTransferTimeoutSec key defines the time in seconds that must pass with no response from the device when transferring a file before an error is generated. Because file transfers can be lengthy operations this timeout value is used as opposed to the ResponseTimeoutSec

If this value is omitted then the default value is 60 seconds

An Example:

;*******************************************************************************
; Example configuration for a calibration type SParam using 1 port
;*******************************************************************************
[CAL_SParam_1Port]
CalAcquireTimeoutSec = 60
CalSetDescription = Cal Set for CAL_SParam_1Port calibration
CalSetName = CAL_SParam_1Port
CalType = SParam
ConfigType = Calibration
DirectoryToUse = C:\Examples
LoadFilename = Before_CAL_SParam_1Port.csa
PathName = PATH_SParam_1Port
PnaDisplayEnable = 1
SaveFilename = After_CAL_SParam_1Port.csa

; FCM calibration device definition
[FCM_1]
ConfigType = Fcm
ConnectionTimeoutSec = 1.0
FileTransferTimeoutSec = 60
IpAddress = 10.11.0.201
ResponseTimeoutSec = 60

; Path referenced by calibration defining which device will be used
[PATH_SParam_1Port]
ConfigType = Path
PnaPort1Device = FCM_1:1

; PNA definition
[PNA-X]
ConfigType = Pna
ConnectionTimeoutSec = 1.0
DirectoryToUse = C:\Temp
FileTransferTimeoutSec = 60
IpAddress = 10.11.0.200
PortCount = 4
ResponseTimeoutSec = 60
VerifyCommands = 0